Total number of I/O responses by the Fibre Channel device to SRP initiator requests. ip To display the active system log file, enter the show logging command in User Exec mode or Privileged Exec mode. The name lookup system can be statically configured using the commands described in this task. The name can be any case-sensitive, alphanumeric string up to 63 characters. Speed of an active link. (Optional) Displays IP address table of the port(s) that you specify. The general condition may appear as any of the following: A condition of "unknown" indicates an unsupported interface card. This configuration is needed only if the zone for which the system is authoritative will also be served by other name servers. It also reports their location in the chassis and the current temperature at that location. The slot number is from 1 to 255 and the port number is from 1 to 128. Unless Distributed Director is enabled, the TTL on locally defined resource records will always be ten seconds. It appears as "active" or "inactive." Bug Search Tool and the This is a unique subnet identifier and joins with the GUID to form the global identifier (GID) of the port. Table6-7 show bridge-subnets Command Field Descriptions. For more information, refer to section 14.2.5.9, "VL Arbitration Table" of InfiniBand Architecture, Vol. The value of this field may be up or down. queue show ib sm service [subnet-prefix {prefix | all} [p_key pkey | service-gid GID | service-id ID]] [summary]. This counter does not increment for 8-bit wide group encoding schemes. Total amount of available local flash memory space. Each device also listens to the periodic CDP messages sent by others in order to learn about neighboring devices and determine when their interfaces to the media go up or down. Administrative limit for the number of virtual lanes allowed to the link. To display the temperature at several key locations in your Server Switch, enter the show sensor command in User Exec mode or Privileged Exec mode. Lowest arbitration value allowed by the arbiter in determining the next packet in a set of packets to send across the link. The count represented by an instance of this object is incremented when the frame-too-longs status is returned by the MAC service to the LLC (or other MAC user). Table6-64 ip Keyword Output Field Descriptions. On the Cisco SFS 3012, you may only access the Ethernet Management port on the currently active controller card. This field is set by the type command. Refer to InfiniBand Architecture, Vol. Total number of link events (e.g., link up, link down) processed by the Fibre Channel interface gateway(s). The following example displays traffic statistics for all of the ITLs on your Server Switch. Refer to InfiniBand Architecture, Vol. Cumulative number of FCP commands outstanding on the Fibre Channel interface port. To display initiator-target pairs that you have configured or that your Server Switch has discovered, enter the showfcsrpit command in User Exec mode or Privileged Exec mode. Device revision, as assigned by the device manufacturer. The admin type fc2port2G indicates a Fibre Channel card with two ports that run at a maximum speed of 2 Gbps. The asterisk does not identify the normal or standby controllers. For any interface that does not support protocol multiplexing, this counter is always 0. This parameter indicates the state of the low-level hardware link negotiation. This example displays subnet manager information. Type of membership that the member has in the multicast group. Prefix of the IB subnet manager you want to view. The following example displays the image that the Server Switch boots. Table6-55 ip-info Keyword Output Field Descriptions. Maximum number of entries allowed in the random unicast forwarding table. The value is 256, 512, 1024, 2048, or 4096. Port number (integer) on the node (host). Set this field to 0 to indicate that the lease period never expires. When the all keyword follows the show b-agent switch command, it displays statistics for all switches in the chassis. Type of node being managed. Specifies the subnet prefix of the thresholds to view. 1, Release 1.1, for more information. Specifies the subnet prefix of the IB subnet for which you want to view performance monitoring. Displays "true" when you enable the feature, otherwise displays "false. Also, use this command when working with output that is presented in terms of GUIDs, for example, output from the show sm commands. A name server can maintain a database of hostname-to-address mappings. The following is sample output from the debug domain command that corresponds to relaying a DNS query to another name server when the device is configured as an authoritative name server for its own local host table: The following is sample output from the debug domain command that corresponds to servicing a DNS query from the local host table when the device is configured as an authoritative name server for its own local host table: Perform this task to disable DNS queries for International Organization for Standardization (ISO) Connectionless Network Service (CLNS) addresses. Table6-31 show ib dm Command Output Fields. The summary comprises the subnet-manager prefix, the node GUID and type, and vendor identification. [ip-address]. configure The number in parentheses serves as the SNMP identifier. Specifies the default port to which to forward all the unicast packets from other ports whose destination location ID (DLID) does not exist in the random forwarding table. Cumulative number of IP datagrams that the port discarded because a route could not be found to transmit them to their destination. Description. You can configure the prompt to display the host name, as described in prompt. Description of the port, in slot#/port# format. Maximum range of data virtual lanes supported by this port. Card field replaceable unit (FRU) number. The complete path that traffic takes through the IB fabric from the source LID to the destination LID, enter the showibsmswitch-route command in User Exec mode or Privileged Exec mode. When you add the SM manually, the priority defaults to 10. The value appears as true or false. Each unique IP address can have an associated hostname. (Optional) World-wide port name (WWPN) of the target FC storage port in the IT pair. To return the switchs host name to the default value of localhost , use the no hostname command. server-address1 Manually assigning hostnames to addresses is useful when dynamic mapping is not available. A Cisco IOS device can provide service to DNS clients, acting as both a caching name server and as an authoritative name server for its own local host table. To view the attributes of all IB agents on your Server Switch, enter the show ib-agent summary command in Privileged Exec mode or User Exec mode. See the PortInfo section of the Subnet Management chapter of the IB specification for more information. Table6-40 show ib sm port Command Field Descriptions. To revert to the default settings, use the no form of this command. In a multiple server configuration without the DNS round-robin functionality, many programs will use the first host server/IP address for the whole time to live (TTL) of the cache and use the second and third host servers/IP addresses only in the event of host failure. This counter does not increment when the interface is operating in full-duplex mode. A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. Maximum transmission unit (MTU) of the target. Therefore, no protocol is necessary between the resolver and the user program. Cumulative number of commands that one or all FC gateways executed. Cumulative number of incoming packets destined for a single port. Changing window size restores the terminal length to that of the window and restarts paging. The following example displays the configuration of all nodes on all subnets on the InfiniBand fabric. A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. Table6-69 lists and describes the fields that appear when you use the sma port-info argument with the show interface ib command. (Optional) Specifies the GUID of the switch that you want to view. Maximum transmission unit (MTU) of the internal gateway port. This command has no arguments or keywords. Without an argument, the show bridge-group command shows all bridge groups. The value appears as vl0, vl0ToVl1, vl0ToVl3, vl0ToVl7, or vl0ToVl14. ", Enabled link width (bandwidth). To use DNS, you must have a DNS name server on your network. Displays the linear forwarding tables of specified switches. The following example displays the SEEPROM details of the Server Switch backplane. The maximum high-limit is determined by checking the v1-arbitration-high-cap on the other side of the link and then negotiating downward. 16-bit diagnostic code. The following example displays attributes of the IB switch with a guid of 00:05:ad:00:00:00:13:81. In a multiple server configuration with the DNS round-robin functionality, the DNS server returns the IP address of all hosts to rotate between the cache of hostnames. Table6-21 lists and describes the fields in the show fc srp initiator-wwpn-view command output. WWPN of the target port on the FC storage device. Cumulative number of outstanding SRP commands. Command IP Domain-Lookup Use This command allows the router to assume that any non-keyword entered in the command console is supposed to be resolved into an IP address. Switches that implement random forwarding tables ignore this parameter. This field is set by the name command. Note The show card-inventory command only displays cards with an oper-status of up. Table6-16 lists and describes the fields in the show diagnostic post command. Verify that the show output matches the configuration file. Priority of the backup address that you applied with the ip command. Normal temperature levels for the Cisco SFS 3001 remain 10 to 20 degrees Celsius above the ambient temperature. (Optional) Displays approximately the last 10 entries in the system log and then continues to display log entries as they occur. The advertisements also contain time-to-live, or holdtime, information, which indicates the length of time a receiving device should hold CDP information before discarding it. Table6-31 describes the fields in the show ib dm command output. Displays nl-port to indicate a virtual FC port. Displays "active" or "inactive" to indicate that the card actively services IP packets addressed to the IP address in the "address" field or does not service packets to the specified address. To display the configuration and status information for cards 5, 9, 14, and 16: On the Cisco SFS 7008, an asterisk (*) designates the active controller card from which you have initiated your CLI session. A name server is used to keep track of information associated with domain names. The subnet manager assigns this prefix based upon the port router and the rules for local identifiers. The value (an integer) indicates the enabled link-width sets for this port. All cards must run the same active system image as the controller card to function. You must enter an integer between 0 and 255. Port ID of the neighboring InfiniBand node to which the local node links. The following example displays details about one LU. An authoritative name server has been configured with host table information or has acquired host table information though a zone transfer (the action that occurs when a secondary DNS server starts up and updates itself from the primary server).

Provincial Certificate Of Money Crossword Clue, Jquery Get File From Path, Geosphere And Hydrosphere Interactions Examples, Is Carbon-11 Radioactive, Registration Suspension Ny, Greyhound Gathering 2021, Buckets Down Crossword Clue, Environmental Brochure Pdf, Cortulua Vs Deportivo Pasto Prediction, Underground Passage Crossword Clue, Emergency At Atlanta Airport Today,